ETC BioMedical Systems
125 James Way
Southampton, PA 18966
Tel: 215.355.9100
Fax: 215.357.4000
|
 |
 |
|
|
|
| home : accessories : air break and oxygen mask assemblies |
Air Break Assembly for ETC Monoplace Hyperbaric Chambers
|
ETC offers an Air Break Assembly for use with all of our monoplace hyperbaric systems.
The assembly consists of an external medical air hose with medical air diss connectors, diss fittings for chamber exterior and interior, and a demand regulator and mask assembly. The masks are disposable and connect to the regulator via a standard 22 mm fitting.
The system can either be connected to the ETC gas supply panel (GSP-100) or other suitably equipped source of medical grade air.
|
Oxygen Mask Assembly for ETC Monoplace Hyperbaric Chambers |
ETC offers an oxygen mask assembly for use with all of our monoplace hyperbaric systems when they are compressed with medical grade air. The oxygen mask assembly consists of an external medical oxygen hose with oxygen diss connectors, diss fittings for chamber exterior and interior and a demand regulator and mask assembly.
The system is intended to be used with sterilization masks which connect to the regulator and can be adjusted between demand and free-flow operation. The system can either be connected to the ETC gas supply panel (GSP-100) or other suitably equipped source of medical grade oxygen.
Note: If the compression gas used to pressurize the monoplace chamber is anything other than 100% oxygen, ETC strongly recommends that a monitor be fitted to the chamber to confirm the contents of the internal atmosphere.
|
|
|
